DSpace Repository

Diseño de interfaz usando minicomputador raspberry pi a ser usada en la impresión en 3 dimensiones, con demostración práctica de funcionamiento en prototipo de impresora reprap.

Show simple item record

dc.contributor.author Ordoñez García, Jorge Enrique
dc.contributor.author Fiallos Barragán, Jazmín Nataly
dc.contributor.author Valdivieso Armendariz, Carlos
dc.date.accessioned 2015-08-19T20:39:22Z
dc.date.available 2015-08-19T20:39:22Z
dc.date.issued 2014-06-05
dc.identifier.uri http://www.dspace.espol.edu.ec/xmlui/handle/123456789/29725
dc.description.abstract This project presents the construction of an interface between a Raspberry Pi minicomputer, Arduino Mega board and a RepRap3D printer. The interface design is because these devices have different characteristics, being necessary the interconnection between these devices using their general-purpose GPIO ports of the Raspberry Pi board. It is also possible to use serial connection among these cards. To complete the interface it is necessary to enter certain commands on the Raspberry Pi under Linux operating system. Several programs must be installed to enable communication between these devices. Likethe Pronterface program that provides a graphical interface that allows the use of the Arduino IDE program to interact with stepper motors and an extruder, to be able to perform the required printing tests for the project. es_EC
dc.language.iso spa es_EC
dc.publisher ESPOL es_EC
dc.rights openAccess es_EC
dc.subject RASPBERRY PI es_EC
dc.subject ARDUINO es_EC
dc.subject COMUNICACIÓN es_EC
dc.subject GPIO es_EC
dc.title Diseño de interfaz usando minicomputador raspberry pi a ser usada en la impresión en 3 dimensiones, con demostración práctica de funcionamiento en prototipo de impresora reprap. es_EC
dc.type Article es_EC


Files in this item

This item appears in the following Collection(s)

Show simple item record

Search DSpace


Advanced Search

Browse

My Account