Please use this identifier to cite or link to this item: http://www.dspace.espol.edu.ec/handle/123456789/43691
Full metadata record
DC FieldValueLanguage
dc.contributor.authorYUMBLA AREVALO, FRANCISCO XAVIER-
dc.contributor.authorLANDÍVAR LÓPEZ, JOEL ALBERTO-
dc.date.accessioned2018-06-25T13:33:02Z-
dc.date.available2018-06-25T13:33:02Z-
dc.date.issued2016-09-08-
dc.identifier.urihttp://www.dspace.espol.edu.ec/xmlui/handle/123456789/43691-
dc.descriptionEL PAPER SOLO SE ENCUENTRA EN INGLESes_EC
dc.description.abstractThe current Project consists on the implementation of an automation training panel for the electronics and automation engineering students at ESPOL University, with the purpose to provide a didactic tool so that the power electronics laboratory’s students could develop any other applications using the equipment and electrical machinery currently available at the laboratory. Also, an auger filling system, consisting of a small conveyor belt and a hopper, was automated as a demonstrative application for the panel. This training panel was designed to have a HMI and a PLC with its digital inputs and outputs wired to terminals on its front face. The same digital inputs on the front face, are represented as two position switches in case it is needed to simulate an external signal, and the digital outputs have pilot lights that work as state indicators. The same principle was applied to the PLC’s analog inputs and outputs, using a variable DC voltage power source to simulate an external signal if desired. The actuators of the filling system were two AC servomotors with their respective AC drives. The control of the devices was made through a PROFIBUS link between the PLC and the drives.es_EC
dc.language.isoenges_EC
dc.publisherESPOLes_EC
dc.rightsopenAccesses_EC
dc.subjectSIEMENSes_EC
dc.subjectHMIes_EC
dc.subjectPLCes_EC
dc.subjectEMERSONes_EC
dc.subjectUNIDRIVE SPes_EC
dc.subjectPROFIBUSes_EC
dc.subjectTIA PORTALes_EC
dc.subjectCTSOFTes_EC
dc.subjectS7-1200es_EC
dc.subjectKTP-600es_EC
dc.subjectAC DRIVESes_EC
dc.subjectAC SERVOMOTORSes_EC
dc.subjectAUGER FILLING SYSTEMes_EC
dc.subjectGSD FILEes_EC
dc.subjectPPO4 WORDes_EC
dc.titleDesign and Implementation of an automation trainining panel with PLC and HMI applied to a filling system using servomotors for the power electronics laboratory.es_EC
dc.typeArticlees_EC
Appears in Collections:Artículos de Tesis de Grado - FIEC

Files in This Item:
File Description SizeFormat 
YUMBLA AREVALO FRANCISCO XAVIER Y LANDIVAR LOPEZ JOEL ALBERTO.pdf785.37 kBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.