Por favor, use este identificador para citar o enlazar este ítem: http://www.dspace.espol.edu.ec/handle/123456789/4894
Título : Interfaz con transmisor de corriente en aplicación con dspic
Autor : Valdivieso A., Carlos
Chele P, Diana
Ramirez M, Mariuxi
Palabras clave : DSPIC
VISUAL BASIC
UART
TRANSMISOR
BUCLE
Fecha de publicación : 28-abr-2009
Resumen : This project was implemented with the aim of showing the benefits of using DsPic in applications over long distances. In this case, a DsPic is used to control the temperature in a drying cabinet for Car Painting. The sensor signal is amplified and conditioned to go into the current transmitter as a voltage input. The help of a loop receiver is needed to transform the current signal in voltage. The current receiver has a conditioned output from 0-5 VDC that connects to an analog input of the DSPIC4011 microcontroller in order to read sensor’s data. This project makes use of Visual Basic to monitor the sensor’s signal using the RS232 serial port and the UART module from the DSPIC. The integrated circuit MAX3232 converts TTL signals from the DSPIC to RS232 level signals for the PC.
URI : http://www.dspace.espol.edu.ec/handle/123456789/4894
Aparece en las colecciones: Artículos de Tesis de Grado - FIEC

Ficheros en este ítem:
Fichero Descripción Tamaño Formato  
7680.pdf256.96 kBAdobe PDFVisualizar/Abrir


Los ítems de DSpace están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.