Por favor, use este identificador para citar o enlazar este ítem:
http://www.dspace.espol.edu.ec/handle/123456789/8936
Título : | Estudio de estabilidad de la pulpa de mora sometida a un proceso de liofilización |
Autor : | Viteri, P. Cornejo, F. |
Palabras clave : | LIOFILIZACIÓN ACTIVIDAD DE AGUA ISOTERMA DE ADSORCIÓN VIDA ÚTIL. |
Fecha de publicación : | 5-feb-2010 |
Resumen : | The objective of this work was to study the stability of freeze-dried blackberry pulp. Firstly, both physical and chemical experiments were carried out on blackberry pulp prior to the freeze-drying process. Secondly, the freezing time for the blackberry pulp, three hours, was determined based on Plank’s method with an initial freezing temperature of -2, 58°C. Then, experiments with the frozen pulp were conducted in a freeze-drying equipment with three different temperature degrees: 105°C, 110°C and 120°C, and a pressure factor of 1.15 ± 0,5 mmHg. As a result, the ideal temperature for the process was found to be 110 °C at which a product with a final humidity of 2, 5% ± 0, 2 and excellent characteristics was obtained; varied sensorial methods were applied in order to confirm this. Besides, the adsorption isotherm for the freeze-dried product was drawn and, with both the monolayer and critical humidity data, the stability was calculated by using Labuza’s method which finally determined that the shelflife for freeze -dried blackberry pulp is 18 months. |
URI : | http://www.dspace.espol.edu.ec/handle/123456789/8936 |
Aparece en las colecciones: | Artículos de Tesis de Grado - FIMCP |
Ficheros en este ítem:
Fichero | Descripción | Tamaño | Formato | |
---|---|---|---|---|
Estudio de Factibilidad de la Pulpa de mora.pdf | 255.3 kB | Adobe PDF | Visualizar/Abrir |
Los ítems de DSpace están protegidos por copyright, con todos los derechos reservados, a menos que se indique lo contrario.